Bardahl Mastic Échappement is a putty designed to repair exhaust pipes.

This putty is easy to use and does not require disassembly.
Be careful not to work on a hot exhaust.

Instructions for use:
1. Using a wire brush: remove dust and rust from the area to be repaired.
2. Run the engine for 2 to 3 minutes until the exhaust becomes warm.
3. Moisten the surface to be treated with a sprayer.
4. Using a spatula: apply the putty generously to the hole to be filled, overlapping the contours.
5. Allow to cure for 12 hours, or run the engine at idle speed to accelerate curing.

Close the can tightly after use.
The shelf life is 12 months.