Thermal unit There are 69 products.
-
HF Thor 190 Evo kit
Optimised cooling kit for the Thor 190 Evo.
Optimised cooling kit for the Thor 190 Evo.
Optimised cooling kit for the Thor 190 Evo.
-
Spark-plug cap Polini
Spark-plug cap to be screwed on.
Spark-plug cap to be screwed on.
Spark-plug cap to be screwed on.
-
-
-
-
Copper washer Ø 14 / 24
Copper washer. inner Ø 14 mm, outer Ø 24 mm.
Copper washer. inner Ø 14 mm, outer Ø 24 mm.
Copper washer. inner Ø 14 mm, outer Ø 24 mm.
-
-
-
Serrated flange nut M8
Self-locking base nut galvanised steel. Ø 8 mm.
Self-locking base nut galvanised steel. Ø 8 mm.
Self-locking base nut galvanised steel. Ø 8 mm.
-
Washer Z Ø 8 / 16
Washer galvanized steel. inside Ø 8 mm, outside Ø 16 mm.
Washer galvanized steel. inside Ø 8 mm, outside Ø 16 mm.
Washer galvanized steel. inside Ø 8 mm, outside Ø 16 mm.
-
Washer Z Ø 7 / 14
Washer galvanized steel. inside Ø 7 mm, outside Ø 14 mm.
Washer galvanized steel. inside Ø 7 mm, outside Ø 14 mm.
Washer galvanized steel. inside Ø 7 mm, outside Ø 14 mm.
-
Nylon lock nut M7
Self-locking galvanised steel nut. Ø 7 mm.
Self-locking galvanised steel nut. Ø 7 mm.
Self-locking galvanised steel nut. Ø 7 mm.
-
Nylon lock nut M8
Self-locking galvanised steel nut. Ø 8 mm.
Self-locking galvanised steel nut. Ø 8 mm.
Self-locking galvanised steel nut. Ø 8 mm.
-
Silentblock Polini Ø 30 x 30 M8 MF / 55
Polini silentblock. Hardness 55 shore.
Polini silentblock. Hardness 55 shore.
Polini silentblock. Hardness 55 shore.
-
Cylinder head support kit
support + bracket + silentblocks + screws.
support + bracket + silentblocks + screws.
support + bracket + silentblocks + screws.
-
-
Cylinder head HF
For HF High Flow engine versions.
For HF High Flow engine versions.
For HF High Flow engine versions.
-
Cylinder gasket - 1 mm
Cylinder gasket, thicknesses of 1 mm.
Cylinder gasket, thicknesses of 1 mm.
Cylinder gasket, thicknesses of 1 mm.
-
Gasket kit for thermal group
Head, cylinder and exhaust gaskets.
Head, cylinder and exhaust gaskets.
Head, cylinder and exhaust gaskets.
-
-
Cylinder & piston kit
Cylinder + complete piston + engine gaskets.
Cylinder + complete piston + engine gaskets.
Cylinder + complete piston + engine gaskets.
-
-
Cylinder front side conveyor HF
For engines in HF "High Flow" version.
For engines in HF "High Flow" version.
For engines in HF "High Flow" version.
-
SHC M5 x 20 Screw
Zinc plated socket head cap screw. Ø 5 mm, length 20 mm.
Zinc plated socket head cap screw. Ø 5 mm, length 20 mm.
Zinc plated socket head cap screw. Ø 5 mm, length 20 mm.
-
-
Cylinder rear side conveyor HF
For engines in HF "High Flow" version.
For engines in HF "High Flow" version.
For engines in HF "High Flow" version.
-
-
Bearing sealed 6202 2RS
Bearing Ø 15 / 35 x 11 (6202 2RS) sealed.
Bearing Ø 15 / 35 x 11 (6202 2RS) sealed.
Bearing Ø 15 / 35 x 11 (6202 2RS) sealed.
-
Bearing sealed 6004 2RS C3
Bearing Ø 20 / 42 x 12 (6004 2RS C3) sealed, radial movement C3
Bearing Ø 20 / 42 x 12 (6004 2RS C3) sealed, radial movement C3
Bearing Ø 20 / 42 x 12 (6004 2RS C3) sealed, radial movement C3
-
Bearing 6205 C3
Bearing Ø 25 / 52 x 15 (6205 C3) radial movement C3
Bearing Ø 25 / 52 x 15 (6205 C3) radial movement C3
Bearing Ø 25 / 52 x 15 (6205 C3) radial movement C3
-
Engine bearings set
For the POLINI Thor 190 Light and 190 Evo engines with clutch or electric starter.
For the POLINI Thor 190 Light and 190 Evo engines with clutch or electric starter.
For the POLINI Thor 190 Light and 190 Evo engines with clutch or electric starter.
-
Engine bearings set - Clutch + elec starter
For the POLINI Thor 190 Light and 190 Evo engines with clutch and electric starter.
For the POLINI Thor 190 Light and 190 Evo engines with clutch and electric starter.
For the POLINI Thor 190 Light and 190 Evo engines with clutch and electric starter.
-
-
Crankshaft with push rod
POLINI 190 Light and 190 Evo engine.
POLINI 190 Light and 190 Evo engine.
POLINI 190 Light and 190 Evo engine.
-
Crankshaft with push rod - Clutch
POLINI 190 Light and 190 Evo clutch engine.
POLINI 190 Light and 190 Evo clutch engine.
POLINI 190 Light and 190 Evo clutch engine.
-
Crankshaft with push rod - Electric
POLINI 190 Light and 190 Evo electric starer engine.
POLINI 190 Light and 190 Evo electric starer engine.
POLINI 190 Light and 190 Evo electric starer engine.
-
Crankshaft with push rod - Electric + Clutch
POLINI 190 Light and 190 Evo electric starer and clutch engine.
POLINI 190 Light and 190 Evo electric starer and clutch engine.
POLINI 190 Light and 190 Evo electric starer and clutch engine.
-
-
-
-
Complete piston
Piston + rings + pin + lock rings.
Piston + rings + pin + lock rings.
Piston + rings + pin + lock rings.
-
-
-
Engine carter blocks - Clutch
For 190 Light and Evo version with clutch.
For 190 Light and Evo version with clutch.
For 190 Light and Evo version with clutch.
-
Engine carter blocks - Electric
For 190 Light and Evo version with electric starter and clutch + electric starter.
For 190 Light and Evo version with electric starter and clutch + electric starter.
For 190 Light and Evo version with electric starter and clutch + electric starter.
-
-
Copper washer Ø 6 / 10
Copper sealing washer. inner Ø 6 mm, outer Ø 10 mm.
Copper sealing washer. inner Ø 6 mm, outer Ø 10 mm.
Copper sealing washer. inner Ø 6 mm, outer Ø 10 mm.
-
Washer L Ø 6 / 18
Washer galvanized steel. inside Ø 6 mm, outside Ø 18 mm.
Washer galvanized steel. inside Ø 6 mm, outside Ø 18 mm.
Washer galvanized steel. inside Ø 6 mm, outside Ø 18 mm.
-
Washer M Ø 6 / 14
Washer galvanized steel. inside Ø 6 mm, outside Ø 14 mm.
Washer galvanized steel. inside Ø 6 mm, outside Ø 14 mm.
Washer galvanized steel. inside Ø 6 mm, outside Ø 14 mm.
-
Nylon lock nut M6
Self-locking galvanised steel nut. Ø 6 mm.
Self-locking galvanised steel nut. Ø 6 mm.
Self-locking galvanised steel nut. Ø 6 mm.
-
-
Exhaust fixing kit (right)
POLINI Thor 190 Light engine, all versions.
POLINI Thor 190 Light engine, all versions.
POLINI Thor 190 Light engine, all versions.
-
Muffler fixing pins (left)
Thor 80, Thor 200, 202, 250 and 190 Evo engines, all versions.
Thor 80, Thor 200, 202, 250 and 190 Evo engines, all versions.
Thor 80, Thor 200, 202, 250 and 190 Evo engines, all versions.
-
Muffler fixing pins (right)
Thor 80 and 190 Evo engines, all versions.
Thor 80 and 190 Evo engines, all versions.
Thor 80 and 190 Evo engines, all versions.
-
Engine subframe - Clutch
For 190 Light and Evo with clutch versions.
For 190 Light and Evo with clutch versions.
For 190 Light and Evo with clutch versions.
-
Engine subframe - Electric
For 190 Light and Evo electric starter with clutch versions.
For 190 Light and Evo electric starter with clutch versions.
For 190 Light and Evo electric starter with clutch versions.
-
Silentblock Polini Ø 40 x 30 M8 MF / 55
Polini silentblock. Hardness 55 shore.
Polini silentblock. Hardness 55 shore.
Polini silentblock. Hardness 55 shore.
-
Engine support spacer kit
Thor 190, Thor 200, 250 and 250 Dual Spark
Thor 190, Thor 200, 250 and 250 Dual Spark
Thor 190, Thor 200, 250 and 250 Dual Spark
-
SHC M8 x 80 Screw
Zinc plated socket head cap screw. Ø 8 mm, length 80 mm.
Zinc plated socket head cap screw. Ø 8 mm, length 80 mm.
Zinc plated socket head cap screw. Ø 8 mm, length 80 mm.
-
Ignition coil
POLINI Thor 190 Light and Evo with clutch, Thor 202.
POLINI Thor 190 Light and Evo with clutch, Thor 202.
POLINI Thor 190 Light and Evo with clutch, Thor 202.
-
Flywheel
Thor 80, 202 and 190 Light and Evo classic and clutch engines.
Thor 80, 202 and 190 Light and Evo classic and clutch engines.
Thor 80, 202 and 190 Light and Evo classic and clutch engines.
-
Transmission case puller - Polini
Extractor for the gearbox housing or the magnetic flywheel.
Extractor for the gearbox housing or the magnetic flywheel.
Extractor for the gearbox housing or the magnetic flywheel.
-
Ignition nut - M10
For crankshafts with a diameter of 10 mm.
For crankshafts with a diameter of 10 mm.
For crankshafts with a diameter of 10 mm.
-
-
-
Hf M6 x 25 Screw
Zinc plated hexagonal with flange head screw. Ø 6 mm, length 25 mm.
Zinc plated hexagonal with flange head screw. Ø 6 mm, length 25 mm.
Zinc plated hexagonal with flange head screw. Ø 6 mm, length 25 mm.
-
Flywheel with ignition sprocket
Complete ignition (rotor + stator) of the POLINI Thor engines in electric starter version.
Complete ignition (rotor + stator) of the POLINI Thor engines in electric starter...
Complete ignition (rotor + stator) of the POLINI Thor engines in electric starter version.
-
Ignition nut - M12
For crankshafts with a diameter of 12 mm.
For crankshafts with a diameter of 12 mm.
For crankshafts with a diameter of 12 mm.
-
